Why is the pressure fluctuating and pulsating on my Alto 3840HA?
Pressure fluctuations and pulsations in your Alto Pressure Washer can be caused by several factors: * Insufficient water supply: Try cleaning the inlet filter, verifying that the water supply is at least 15 l/min, and ensuring your water hose is a minimum of 3/4". * Frozen hoses or spray lance: Allow them to thaw completely.
What to do if my Alto 3840HA's burner does not ignite?
If the burner on your Alto Pressure Washer's boiler isn't igniting, here are a few things to check: * Fuel Tank: Ensure the fuel tank has at least 5 liters of fuel. * Flame: Inspect the suction filter in the fuel tank.
Why is the pressure varying on my Alto 3840HA?
If the pressure varies from maximum to minimum, or is considerably lower than usual on your Alto Pressure Washer, it could be due to: * A clogged nozzle: Clean the nozzle. * High back pressure: Remove any extension hoses or accessories and try again with a standard hose.
What to do if my Alto Pressure Washer machine does not react?
If your Alto Pressure Washer isn't reacting, check the fuses, electric cable, and plug.
What to do if my Alto Pressure Washer display is dark?
If the display on your Alto Pressure Washer is dark, check the fuses, electric cable, and plug.
General| Brand | Alto |
|---|---|
| Model | 3840HA |
| Category | Pressure Washer |
| Language | English |
Details from the model tag, including serial number and production year.
Key technical specifications of the machine, such as pressure and temperature.
Steps and checks before starting the machine, including cable and power.
Precautions and warnings for operating the machine safely.
Details on connecting the high pressure hose, water, and power supply.
Primary applications for the high pressure washer.
Explanation of low, high, and intermediate pressure settings.
Information on using detergents for efficient cleaning.
How to adjust the detergent dosing unit for various cleaning tasks.
Overview of the water and fuel system flow.
Description of the high pressure pump, circulation, and safety valves.
Details on the motor's overload protection systems.
Explanation of the burner system control unit and sensors.
How the burner override mode functions as a safety device.
Routine checks and recommendations for maintaining the machine.
Steps for descaling the boiler coil to prevent scale buildup.
How to clean the high pressure nozzle to prevent blockages.
To Next Page