5
1
3
5
7
9
2
4
6
8
12
14
16
18
20
13
15
17
19
DK-9560 HADSUND
TLF . (+45) 9952 2100
MODEL
TYPE
SERIAL NO
PRODUCTION YEAR
CAPACITY
MAX. PRESSURE
WORKING PRESSURE
INLET PRESSURE
INLET TEMPERATURE
HEATING POWER
MAX. OUTLET TEMP.
MADE IN DENMARK
POWER
FREQUENCY
VOLTAGE
PHASE
POWER CUNSUMPTION
RPM
COS
ϕ
INSULATION CL.
MOISTURE RES. CL.
11
10
1.0 Model survey GB
1.1 Model tag
This ALTO high pressure cleaner has the series
designation »40HA« and the type designation
»P458«. The model designation appears from the text
on the control panel and the model tag.
The tag provides the following details:
9. Max. temperature of inlet water
10. Heat rating of boiler
11. Max. temperature, outlet
12. Power absorption of motor
13. Mains frequency
14. Mains voltage
15. Number of phases
16. Power consumption of motor
17. Number of revolutions
18. COS ϕ
19. Classification of insulation
20. Classification of tightness
1. Model
2. Type
3. Serial number
4. Production year
5. Capacity, water volume
6. Max. pressure, opening pres-
sure for circulation valve
7. Working pressure
8. Max. inlet pressure
1.2 Technical data
Model 3840HA
Pump pressure bar 195
Water volume, min/max pressure l/min. 16/14.6
Max. pressure, inlet water bar 10
Max. temperature, inlet water °C30
Water temperature °C80
1)
/150
2)
Fuel consumption at 62°C l/h 5.4
Fuel tank, capacity l 25
„No Scale“ container, contents l 1
Spray lance:
Nozzle diameter h.p./l.p. mm 1.35/3.5
Spray angle h.p./l.p. degrees 15/65
Nozzle type 05
Thrust, max. N/kp 37/3.8
Sound pressure level L
pA
measured in accordance with ISO 11202 [DISTANCE 1m] [FULL LOAD]:
79 dB(A)
This machine has been manufactured in accordance with the Low Voltage Directive 73/23/EEC and the
EMC directive 89/336/EEC inclusive of subsequent amendments.
1)
Temperature at max. pressure and 12°C inlet water
2)
Steam at 150°C is reached at reduced water volume
Data at 12°C inlet water. We reserve the right to make alterations.
3840HA_EU.p65 28-02-01, 11:245
To Next Page
Loading...
Need help?
General
