To Next PageTo Next Page
Need help?Do you have a question about the Alto Wap SC 710 W and is the answer not in the manual?
General| Nozzle Included | Yes |
|---|---|
| Voltage/phase/frequency (V/~/Hz) | 230 V / 1~ / 50 Hz |
| Pump (RPM) | 2800 RPM |
| Cable Length (m) | 5 m |
| Weight (kg) | 21.2 kg |
Ensure the cleaner is operated only by trained and authorized personnel after reading manuals.
Verify cleaner condition, power lead integrity, and upright operation before use.
Guidelines for safely handling and protecting the mains power lead from damage.
Crucial safety warnings and precautions before performing maintenance or repairs.
Stresses using original spare parts and avoiding unauthorized technical modifications.
Details voltage verification against local supply and ensuring correct electrical connections.
Outlines required safety examinations and periodic inspections for the high-pressure cleaner.
Explains the operation of the safety device and its factory-set, sealed configuration.
Emphasizes reading all operating instructions and safety notes before use.
Identifies and labels the main parts of the machine using a figure reference.
Key preparatory steps and considerations before commencing operation.
Step-by-step guide for initiating the machine's operation after preparation.
Instructions for operating the cleaner using cold water.
Instructions for operating the cleaner using hot water.
Procedures for operating the cleaner in steam mode at temperatures above 100°C.
Guidance on using the RotoFix and Coaxial spray lances for effective cleaning.
How to adjust the pressure and water volume using various controls.
Instructions for correctly using and applying cleaning agents with the machine.
