To Next PageTo Next Page
Need help?Do you have a question about the Alto Wap DX 860 and is the answer not in the manual?
General| Brand | Alto |
|---|---|
| Model | Wap DX 860 |
| Category | Pressure Washer |
| Language | English |
Use of the high-pressure cleaner is subject to applicable local regulations.
Ensures the cleaner is in safe condition, mains lead is safe, and operated upright.
Avoid dangerous substances, protect delicate parts, ensure ventilation.
Follow instructions, use original parts, contact service for complex repairs.
Verify voltage matching between cleaner and mains supply.
Ensure proper cross-section, watertight protection, and correct connections.
Describes the pressure relief mechanism and factory setting.
Diagram showing numbered parts of the machine and accessories.
Illustration of the operating panel with controls and indicators.
Illustrations showing how to connect the spray lance and water hose.
Distinguishes between SC and DX models for controls.
Use only Wap products, observe general advice for professional use.
Covers fuel, safety, and area requirements before operation.
Procedure for initial start-up and priming the machine.
Details for cold water, hot water, and steam operation.
Guidance on operating RotoFix, Coaxial lances, and pressure controllers.
Steps for safe shutdown, draining, and storing the machine.
Overview of routine checks, oil changes, pump, flame sensor, and heat exchanger.
Covers fuel system, scale alarm settings, and descaling.
Detailed steps for removing scale deposits using Wap scale remover.
Instructions for protecting the machine from freezing temperatures.
Lists display errors, starting issues, pressure problems, and cleaning agent draw issues.
Detailed technical specifications for SC 710 W, SC 740 W, and SC 780 models.
Detailed technical specifications for DX 840 W, DX 860, DX 900, DX 980, and TitanPlus models.
