14
3.0 Accessories EN
3.1 Mounting of wall fi ttings
Wall hook for PW
Mount the wall hook for your pressure washer on a
vertical wall with the big hole at the top (see illustra-
tion).
It is important to mount all 4 screws.
Wall accessories storage
Mounting of wall rack:
1. Hold the wall rack against a vertical wall with the
holes facing forwards. Use the two drill grooves
for marking of the point where the screws should
be mounted (see illustration).
2. Mount the screws without screwing them home
- the screw head should be approx. 3 mm from
the wall.
3. The wall rack can now be mounted over the
screws.
Equipment
Only use original accessories.
Nozzles Attached with the „Click and
Clean“ connector sy stem.
Tornado
®
PR (7) Pressure regulated univer-
sal nozzle. Max. effect at a
distance of approx. 7 cm.
Powerspeed
®
(8) Nozzle with rotating jet for
stubborn dirt on hard surfac-
es. Max. effect at a distance
of approx. 10 cm.
Car nozzle (9) Special nozzle for enamelled
surfaces.
Optimal distance: 30 - 50 cm.
Undercarriage 90
o
angled special
nozzle (10) nozzle for undercarriage
and wheel arches. In te -
grated guide shoes.
Multiangle Adjusted in angles from 0
o
-
adaptor (11) 90
o
for better working post ure
and cleaning of hard to get at
places as for instance barrels
or the un der si de of the lawn
mower. Fits all nozzles.
Extension hose 7 m extension hose increa-
sing the working ran ge.
Brushes (13, 14) For cars and
other surfaces.
Available in
more shapes.
Tube cleaner 15 m long tube cleaner for the
cleaning of tubes and drains.
Water-sand- For removal of paint and rust.
blasting equipment Sand available from do-it-
yourself shops.
Patio Cleaner Equipment for quick
cleaning of patio/
drive/fl agstones.
To Next Page
Loading...
Need help?
General
