Make all initial connecEions with all the equipment
powered
off, and ensure
that all Ëhe main volume
conËnols
are turned completely down,
'1
J.
Connect one
side of the signal cable
at
youn
audio
mixen
into output
left
/righÈ
[with Steneo-Jack on
XLFI]
and
the other side of the cable into
the
line
input
(Stereo-Jack)
of
youn
active
speaken cabinet.
2J.
Connect
the
power
cond to mains.
31. Tunn
on
youn
mixen first, then the active speaker cabineËs.
41.
Turn
up the volume
control of
the
active speaker cabineËs.
51.
Use
PFL
function
to
geL
the
proper
input
level
for
the
mixen, and
adjust
the main mix level
control to
manipulaÈe the
output
level.
6). Aften using, tur
n
off
youn
active speaker cabineËs first, then the
mixen
Signsl Cable
Signsl Csble
Power
Cord
Power
Cord
&
To Next Page
Loading...
