Need help?Do you have a question about the Alto TS115 truesonic and is the answer not in the manual?
Illustrates how to connect microphones, mixer, and powered amplifier to the speaker.
Details secure speaker mounting on a stand or suspension points, advising against vertical arrays.
Describes input and thru Speakon connectors for amplifier and speaker linking.
Output Power| continuous output power | 250 W |
|---|---|
| program output power | 500 W |
| peak output power | 1000 W |
Frequency| crossover frequency | 2.15 kHz |
|---|---|
| frequency response | 48 Hz – 18 kHz |
| low frequency woofer size | 15" (305mm) |
| high frequency driver size | 1" (25 mm) |
Sound Pressure Level| max SPL continuous | 121 dB |
|---|---|
| max SPL peak | 127 dB |
| input sensitivity | 97 dB SPL |
Impedance| nominal impedance | 8Ω |
|---|
Connectivity| input connector type | Speakon |
|---|---|
| link connector type | Speakon |
Dimensions and Weight| dimensions | 26.7" x 16.9" x 15.2" (679 mm x 430 mm x 385 mm) |
|---|---|
| weight | 39.9 lbs (18.1 kg) |
To Next Page
