Need help?Do you have a question about the Alto TS112W and is the answer not in the manual?
Power| output power peak | 800 W |
|---|---|
| output power continuous RMS | 400 W |
| power supply voltage | 100 VAC, 110-120 VAC, or 220-240 VAC |
| power supply frequency | 50/60 Hz |
| inrush current at initial switch-on | 4.76 A |
| inrush current after power supply interruption | 4.64 A |
Audio Specifications| crossover frequency | 2.5 kHz |
|---|---|
| max SPL at 1m peak | 125 dB |
| max SPL at 1m continuous | 122 dB |
| frequency response | 65 Hz – 19 kHz |
| frequency range | 54 Hz – 20 kHz |
| low frequency driver size | 12" (305 mm) |
| low frequency voice coil size | 2" (51 mm) |
| high frequency driver exit size | 1" (25 mm) |
| high frequency voice coil size | 1" (25 mm) |
| horn coverage horizontal | 80/100° |
| horn coverage vertical | 60° |
Connectivity| input control gain range | Line/Mic –∞ to +50 dB |
|---|---|
| max input level | +23 dBu |
| impedance | 15 kΩ |
| connectors input | Two 1/4" TRS or XLR |
| connectors link | One XLR |
| wireless connectivity | Bluetooth (A2DP) |
| wireless range | 60-80 feet (18-24 meters) |
Weight and Dimensions| weight | 36.2 lbs. (16.4 kg) |
|---|---|
| dimensions (H x W x D) | 25.5" x 15.1" x 14.4" (648 mm x 384 mm x 365 mm) |
| mounting socket diameter | 36 mm |
To Next Page
