Alto MS8 - Page 9

4).Choosing
which slot
to use there
are three slots
in each bracket apm. use
the fonward
slot
[as shownJwhen
the cabinet is facing
perpendicular
to the
bnacket mounting
sunface.
5).Hanging
the Cabinet
A.
Place a neoprene
gasket
on the
bracket's lower
arm. Centen it on
the
appropriate slot.
B. Position the cabinet
between
the bracket arms.
G.
Align the bracket's
top
slot Èo the
cabinet's M10
threaded hole.
D. Holding the
cabinet
in
position,
insent the screw
Ëhrough the brackeE
slot
and into the cabinet's
top threaded
hole and hand
tighten.
E. Repeat step D
through
the bottom
bracket hole.
F.
Position
cabinet
and tighten both
screws wiuh a
Smm wnench.