Alto TS212 User Manual

22
TS212 (continued)
Cabinet
Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Controls Volume, power on/off with LED, clip limiter with LED, ground lift
Protection
Electronic clip, thermal and transducer overdrive protection
Power AC Input: 100–120/220–240 V, 50/60 Hz
Fuse: 100-120 V T6.3AL AC250V / 220-240 V T3.15AL AC250V
Dimensions
(width x depth x height)
14.04” x 13.80” x 23.28”
357 x 351 x 591 mm
Weight
28.35 lbs.
12.86 kg
TS215
Output Power
1100 W peak (700 LF + 400 HF)
550 W continuous RMS (350 LF + 200 HF)
Low Frequenc
y
15” (381 mm) woofer, 2” (51 mm) voice coil
High Frequency 1” (25 mm) neodymium driver
Crossover
2 kHz
Maximum SPL
129 dB peak, 126 dB continuous (dB-SPL @ 1 m)
Frequency Response
50 Hz – 20 kHz (+ 3 dB)
Frequency Range 43 Hz – 22 kHz (-10 dB)
Coverage
80°/100° H x 60° V nominal
Connectors (2) 1/4” (6.35 mm) TRS or XLR inputs
(1) XLR link output
Cabinet Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Controls
Volume, power on/off with LED, clip limiter with LED, ground lift
Protection Electronic clip, thermal and transducer overdrive protection
Power AC Input: 100–120/220–240 V, 50/60 Hz
Fuse: 100-120 V T6.3AL AC250V / 220-240 V T3.15AL AC250V
Dimensions
(width x depth x height)
15.60” x 14.04” x 25.68”
396 x 357 x 652 mm
Weight 32.72 lbs.
14.84 kg
Trademarks and Licenses
Alto Professional is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. All other
product or company names are trademarks or registered trademarks of their respective owners.

Alto TS212 Specifications

General

Power Output	550W continuous, 1100W peak
Max SPL	125 dB
LF Driver	12" Woofer
HF Driver	1 inch (25.4 mm) neodymium driver
Input Types	2 x XLR/TRS combo
Outputs	1 x XLR output
Enclosure	Trapezoidal, injection-molded polypropylene
Mounting	Pole mountable
Type	Active 2-way PA Speaker