Need help?Do you have a question about the Alto tssub15 truesonic and is the answer not in the manual?
Power| output power continuous RMS | 600 W |
|---|---|
| output power peak | 1200 W |
| power supply voltage | 100-120V/220-240 V |
| power supply frequency | 50/60 Hz |
| inrush current at initial switch-on | 10.39 A |
| inrush current after power supply interruption | 7.54 A |
Audio Specifications| max SPL continuous | 123 dB |
|---|---|
| max SPL peak | 126 dB |
| frequency response | 42 Hz – 125 Hz (@ -10 dB) |
Weight and Dimensions| height | 23.3" (591 mm) |
|---|---|
| width | 17.8" (451 mm) |
| depth | 20.2" (513 mm) |
| weight | 59.5 lbs (27 kg) |
Connect the included power cable to this input and connect the other end to a power source.
Turns the subwoofer on/off. Ensure the volume knob is set to "zero" before turning it on.
Illuminates when the subwoofer is powered on.
Knob used to adjust the subwoofer's volume.
Use standard XLR cables to connect your sound source to these inputs.
Use standard XLR cables to connect the subwoofer to your speakers.
Use standard XLR cables to connect the subwoofer to an additional amplifier.
Indicates when the audio signal is clipping or distorting. Reduce volume if lit frequently.
Depressing this switch grounds the subwoofer to reduce hum or noise.
Reverses the polarity of the subwoofer's output signal to reduce interference.
Activates the subwoofer's high-pass filter at 80 Hz.
To Next Page
