Need help?Do you have a question about the Altronix NetWay8 and is the answer not in the manual?
General| Model | NetWay8 |
|---|---|
| Ports | 8 |
| Connectors | RJ45 |
| Operating Temperature | 0°C to 50°C |
| Enclosure | Metal |
| PoE Standard | IEEE 802.3af |
| Power Output | 56VDC |
| PoE Power | 30W per port |
| Total Current | 1.5A |
| Ethernet | 10/100 Mbps |
| Wire Type | Cat5e or better |
| LED Indicators | Power, PoE |
| Storage Temperature | -20°C to 70°C |
| Humidity | 5% to 95% non-condensing |
| Dimensions | 8.5" x 5.5" x 1.75" |
| Network Protocols | IEEE 802.3, 802.3u, 802.3af |
Details the Altronix NetWay8/NetWay16 Midspans for powering PoE/PoE+ cameras and edge devices.
Specifies the port count and distance capabilities for NetWay8 and NetWay16 units.
Covers agency listings, power output, functions, and key features of the NetWay units.
Instructions for connecting cables, setting the master power disconnect, and powering up the unit.
Explanation of LED indicators for port status, device detection, and overloads.
Guides for installing NetWay1512, NetWay3012 adapters, and NetWayXT/XTX repeaters.
Details on interpreting LED status for NetWayXT and NetWayXTX repeaters.
Specifies the port count for NetWay8 (Eight) and NetWay16 (Sixteen).
Details the AC voltage, frequency, and current draw for NetWay8 and NetWay16.
Lists operating and storage temperature, humidity, and altitude limits.
States UL/CUL listing for Information Technology Equipment and CE approval.
Provides mechanical drawing and dimensions for rack mounting the NetWay units.
Details procedures for rack, wall, and shelf installation.
Lists the hardware provided for unit installation: brackets, screws, and rubber pads.
Alerts users to dangerous voltage within the enclosure and risk of electric shock.
Contains manufacturer disclaimers regarding errors, specification changes, and contact information.
To Next Page