Altuna FIRST AF150 - Page 25

ALTUNA AF28
25
EN
Fit chainring and chain clockwise.
Aligning the coil and the pin.
Tighten the screw in the
direction of the chain.
3 5
Do not
overtighten
Fit the cover tightly and
turn the cover clockwise
to lock it in place.
6 7 8
Readjust the chain
tension if necessary.
Turn the adjusting screw
clockwise to tighten the
chain, counterclockwise
to loosen it.
Do not over-tighten.
Note: Frequently check and adjust the chain tension. A slack
chain is easy to derail, which can lead to rapid wear of the chain
and guide plate.