ALTUNA AF28
26
EN
CUT
• When the appliance is in operation, keep your other hand at least 15 cm away from the
cutting area of the blade.
• To ensure optimum service life of the chainsaw, do not overload the equipment or cut
branches with a diameter of more than 15 cm.
• To protect the battery in cold or wet weather, place it under waterproof clothing.
• Unplug the battery at the end of the cut.
• Do not use this equipment in the rain
MAINTENANCE AND CLEANING
Always switch o the machine and remove the battery pack from
the machine before cleaning and maintenance.
• Clean the chain carefully after each use.
• Clean the chain with lubricating oil (bar oil or similar) and spray it with metal protection spray.
• Do not spray the equipment with water
• Clean the machine housing regularly with a soft cloth, preferably after each use.
• Keep the fan, engine room and equipment handle clean.
• Remove stubborn dirt with a soft cloth dampened with soapsuds. Do not use solvents such
as petrol, alcohol, ammonia, etc. These chemicals damage the synthetic components.
Environment Defective or discarded electrical or electronic equip-
ment should be collected at appropriate recycling sites.
To Next Page
Loading...