Alula RE524X User Manual

• Selectable wireless panel and sensor compatibility
• Translator or repeater operation
• Rechargeable backup battery
• Cover tamper
• Certied to UL1023, ULC1023, UL1610, and ULC S304
PANEL ENROLLMENT
(For full sensor enrollment instructions, refer to Advanced Setup, step 3)
A Enroll Translator into Panel.
• Trip the translator tamper to enroll the translator into the panel (For Honeywell® and 2GIG® panels select loop 1).
-or-
• Enter ID into panel. The translator’s ID is printed on the bar code label.
B Enroll Sensors into Panel
• With the translator cover open, trip each sensor to enroll it into to the panel.
• Finish setup of each sensor at the panel.
Features
FINISH
A With the translator cover open, perform a panel sensor test.
B Close the cover. Test and verify proper operation of the sensors at the panel.
C Cut the lock wire to lock the translator (For more information on locking, refer to Advanced Setup, step 4).
D Secure cover with screw.
DIAGRAM
Wall mounting
screw locations
MOUNT AND WIRE
A Select a mounting position and location.
B Connect the power supply to the translator.
1
2
3
4
TRANSLATOR CONFIGURATION
A Select the brand of panel that the translator must
talk to using the “PANEL SELECT” knob.
B Select the brand of sensors that the translator must
listen to using the “SENSOR SELECT” knob.
C Sensor conguration: The translator must learn
the sensors that are to be translated or repeated.
a) Press the “CONFIGURE” button to enter conguration mode.
b) Tamper or trip all sensors that are to be included in the system
c) Press the “CONFIGURE” button to exit conguration mode.
Quick Setup
(Mounting hardware not included. Use two
#4 or # 6 screws for mounting )
Wall Tamper
(Do not overtighten
mounting screw)
Installation Guide: RE524X & RE524XC Universal Wireless Translator™

Alula RE524X Specifications

General

Brand	Alula
Model	RE524X
Category	Electronic dictionary
Language	English

Summary

Quick Setup

Mount and Wire

Select mounting position and connect power supply.

Translator Configuration

Select panel and sensor brands, then enter configuration mode.

Panel Enrollment

Enroll translator and sensors into the panel.

Finish Setup

Perform sensor test, secure cover, and lock translator.

Advanced Setup

Mount and Wire Details

Detailed instructions for mounting and wiring the translator.

Translator Configuration Details

Configure translator for specific panel and sensor brands.

Panel Enrollment Procedures

Enroll translator and sensors into various panel types (Honeywell, 2GIG).

Panel Enrollment - Specific Panels

DSC and Qolsys Enrollment

Enrollment procedures for DSC and Qolsys panels.

Final Setup and Locking

Final steps including sensor testing and translator locking.

Notes and Defaults

Sensor Information

Data retention, low battery, and loop support for sensors.

Fault Conditions

Details on 12VDC input overvoltage and removed faults.

Factory Default Procedure

Procedure to reset the translator to factory default settings.

Specifications and Notices

Product Specifications

Physical, environmental, power, and wireless radio details.

Certifications

List of certifications including ETL and FCC compliance.

Warranty Information

Information on Alula's product warranty.

Regulatory Notices

FCC and IC compliance statements and operation conditions.