Pro Tips
3M VHB Tape works great if the surface is properly prepared and rm pressure is applied
for over 10 seconds.
Surface Preparation
• Clean the surface
• Ensure the mounting surface temperature is above 50 °F
Wireless performance is optimized when mounted near the top of the door in a vertical
orientation.
OK BESTWRONG
Wire an external contact by securing one wire in to either the external 1 or external 2
port and the other wire in to the common port. If both external contacts are used two
wires will be inserted into the common port.
Cover Tamper
Switch
Reed Switch
Battery
+
-
External 2
External 1
Common
To Next Page
Loading...
