Alula RE601 - Page 3

Magnet Gap Specications
X Axis
Z Axis
Non-Ferromagnetic Surface
Nominal Mounting Distance
X Axis - Make
Break
Y Axis - Make
Break
Z Axis - Make
Break
1.00 inches (2.5 cm)
1.10 inches (2.8 cm)
1.30 inches (3.3 cm)
2.40 inches (6.1 cm)
2.55 inches (6.5 cm)
1.20 inches (3.0 cm)
1.35 inches (3.5 cm)
Ferromagnetic Surface
Nominal Mounting Distance
X Axis - Make
Break
Y Axis - Make
Break
Z Axis - Make
Break
0.50 inches (1.2 cm)
0.60 inches (1.5 cm)
0.65 inches (1.7 cm)
1.70 inches (4.3 cm)
1.75 inches (4.5 cm)
1.05 inches (2.7 cm)
1.10 inches (2.9 cm)
Y Axis