Need help?Do you have a question about the ALUP Kompressoren SCK 26 and is the answer not in the manual?
Guidelines for erection, operation, and maintenance by trained personnel.
Checks for allowable room temperature and electrical connection before operation.
Procedures for checking oil level and motor rotation direction during commissioning.
Precautions for carrying out maintenance and general operation safety.
Explains the information shown on the Air-Control display, including pressure and temperature.
Describes the function of each button on the Air-Control panel.
Lists and explains warning codes and their meanings indicated by lamps and symbols.
Lists and explains error codes indicated by lamps and symbols.
Details how to access and change various settings using codes.
How to check pressure relief before maintenance and safety warnings.
Addresses issues causing the compressor to shut down related to discharge temperature.
Troubleshooting steps for a drop in line pressure.
Identifies causes and solutions when the safety valve activates.
Interprets warning lights and their associated causes.
Resolves issues preventing automatic restarts after shutdown or idling.
Troubleshooting steps when the start key does not initiate operation.
Addresses excessive oil consumption leading to high oil content in air.
Diagnoses and resolves premature compressor shutdown before reaching cut-out pressure.
General| Model | SCK 26 |
|---|---|
| Type | Screw Compressor |
| Power | 2.2 kW |
| Air Delivery | 260 l/min |
| Weight | 135 kg |
| Free air delivery | 260 l/min |
| Motor power | 2.2 kW |
| Voltage | 400 V |
| Frequency | 50 Hz |
To Next Page
