Insert the pins of the base to the holes of lower support, press
to secure the pins. Using 4pcs screw M5x12 to secure the lower
support and base. Insert the pins of the control box assy to the
holes of upper support, press to secure the pins. Using 4pcs
screw 3/16” screw to secure the upper support and control box
assembly.
Assemble block belt. Fix the block belt to the 2pcs of lower
support behind the front door,using 2pcs screw M5X12.
7
STEP 2
STEP 3
J
K
DD
GG
L
GG
To Next Page