EasyManua.ls Logo

Alvey REEF QUEEN - User Manual

Alvey REEF QUEEN
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Instructions
for Use
Congratulations and thank you for choosing an Alvey Reel
After firmly attaching the Deck Winch Reel to the rail or mounting system of your launch, the line is passed
between the roller runner and guide pin. The rig, bait and sinker are then attached and dropped overboard.
With the Star Nut slackened the sinker will quickly take your baited line down, but you must be ready to
stop the spool with your hand immediately the sinker hits the bottom to prevent overrun. You should then
tighten the Star Adjusting Nut to apply the desired tension on the line from the spool.
An adjustable overrun bar is provided (on some models) which is set close to the rim of the spool to prevent
the line from coming off the spool under normal circumstances; nevertheless, failure to stop overrun when
playing line out off a free spool could result in some loose coils of line getting caught around the axle. If this
should accidentally happen, it is often quicker and easier to remove the spool in order to free the line.
To remove the Spool: If the winch has double winding handles, remove the lock nuts and second handle
from the main shaft. Then remove the knurled centre screw (only applies to Reef Master) and unscrew the
Star Nut. Now, hold the spool firmly with one hand whilst the axle is withdrawn with the other. The line will
now free itself and the axle Star Nut and centre screw can be replaced ready for action.
When replacing the axle, it may be necessary to turn it until the slot in the axle engages the notches in
the internal mechanism of the friction clutch.
The process of removing the spool, freeing the line and replacing it should take only a few seconds, but will
not be necessary if a little care is taken to prevent overrun when playing out line with a free spool.
Double winding handles on large winches will take a little longer to remove. The non-reversing friction clutch
is set to the desired tension by means of the Star Adjusting Nut or handwheel. As this can be adjusted at
any time whilst playing a fish, it is not necessary to set it to maximum tension for normal fishing. Reels can
be mounted on an optional swivel clamp to allow the reel to follow the direction of the line and this action can
be used to lay the line evenly on the spool when retrieving line. A crank screw is provided to prevent the
reel from swivelling if desired.
Alvey products are guaranteed against faulty materials or workmanship
Spare parts and service, if necessary, are readily available.
Maintenance:
Wash off with fresh water after each use.
Oil handles and roller guides with light oil.
Oil or light grease in grease nipple occasionally
depending on use.
Major Service:
Oil clutch washers (Remove clutch cover plates
if applicable).
Reel Icon Pty Ltd Trading as
Alvey Reels Australia ABN 57 625 261 707
2-6 Antimony Street Carole Park Qld 4300
t: +61 7 3271 2844 f: +61 7 3271 2451
For more hints and tips on maintenance, please
visit the spare parts page at www.alvey.com.au
e: info@alvey.com.au
#alveyreels
Question and Answer IconNeed help?

Do you have a question about the Alvey REEF QUEEN and is the answer not in the manual?

Summary

Reel Operation Guide

Initial Setup and Line Feeding

Attaching the reel, passing the line, attaching rig, and dropping overboard.

Preventing and Clearing Line Overrun

Managing line release, stopping spool, and freeing jammed line from the axle.

Adjusting Reel Tension and Clutch

Setting Star Adjusting Nut tension and adjusting the non-reversing friction clutch.

Reel Maintenance and Service

Routine Maintenance Tasks

Washing, oiling handles, guides, and grease nipples for longevity.

Major Service Recommendations

Lubricating clutch washers as part of major service procedures.

Overview

The Alvey Reel, specifically the 14WC2M - REEF QUEEN model, is a robust fishing reel designed for deck winch applications, offering durability and user-friendly features for various fishing conditions.

Function Description

The Alvey Reel is primarily used for deep-sea fishing from a launch, where it is firmly attached to the rail or a dedicated mounting system. Its core function is to manage fishing line, allowing for the deployment of bait and sinkers, and the retrieval of fish. The reel incorporates a friction clutch mechanism, adjustable via a Star Adjusting Nut or handwheel, which allows the user to set the desired line tension. This adjustability is crucial for playing fish, as tension can be modified in real-time. The reel also features an adjustable overrun bar (on some models) positioned close to the spool's rim to prevent line from coming off the spool under normal circumstances, minimizing tangles and snags. For larger winches, double winding handles are provided, enhancing leverage and ease of retrieval. An optional swivel clamp allows the reel to follow the line's direction, aiding in even line lay on the spool during retrieval, with a crank screw to prevent swiveling if desired.

Important Technical Specifications

The 14WC2M - REEF QUEEN model comprises several key components that contribute to its functionality and durability:

  • Stainless Steel Body (D1A-RQ): Provides a strong and corrosion-resistant frame for the reel.
  • Over Run Bar (D1B-RQ): A safety feature to prevent line overrun.
  • Side Bushes (Pair) (D1C-RQ): Essential for smooth operation of moving parts.
  • Guide Assembly (D3A-RQ) and Guide Roller Assembly (D3B-RQ): Directs the fishing line smoothly onto and off the spool, reducing friction and wear.
  • Stainless Steel Arm Only (D4E-RQ): Part of the handle mechanism, ensuring durability.
  • Spool Only (D4A-RQ) and Spool & Washers (D4B-RQ): The core component for holding the fishing line.
  • Handle Only (D4D-RM), Handle Screw (D4E-RM), Handle Assembly (D4F-RM), and Handle Lock Nut (D4G-RM): These components form the winding mechanism, designed for secure and efficient operation.
  • Felt Plug (D4H-RM): Likely used for sealing or cushioning.
  • Drag Wheel & Bush (D7A-RQ) and Star Nut Bush (D7G-RQ): Integral to the drag system, allowing for adjustable tension.
  • Drag Washer - Metal (Full set of 10) (D7B-RQ) and Drag Washer - Fibre (Full set of 10) (D7C-RQ): These washers create the friction necessary for the drag system, providing smooth and consistent resistance.
  • Star Adjusting Nut (D7D-RQ): The primary control for setting drag tension.
  • Handle Plate with Spindle Only (D7E-RQA) and Handle Plate Only (D7E-RQB): Components of the handle system.
  • Handle Plate Lock Nut (each) (D7F-RQ): Secures the handle plate.
  • Drag Pawl (D7J-RQ): A mechanism within the drag system, likely for engagement or disengagement.
  • Grease Nipple (D7K-RM): For lubrication of internal components.
  • Drag Retainer Plate (D7L-RQ): Holds the drag washers in place.
  • Spool Stud Nut & Washer (D7M-RM): Secures the spool.
  • Belville Washers (Pair) (D7Q-RQ): Spring washers that provide consistent force in the drag system.

The reel is guaranteed against faulty materials or workmanship, backed by a 10-year warranty, highlighting its expected durability and quality.

Usage Features

The Alvey Reel is designed for ease of use and efficient fishing:

  • Line Deployment: After attaching the reel and passing the line through the roller runner and guide pin, the rig, bait, and sinker are dropped overboard. With the Star Nut slackened, the sinker quickly takes the baited line down. Users must be ready to stop the spool manually once the sinker hits the bottom to prevent overrun. The Star Adjusting Nut is then tightened to apply the desired line tension.
  • Overrun Prevention: The adjustable overrun bar helps prevent line from coming off the spool. In case of accidental overrun and line tangles around the axle, the spool can be removed to free the line.
  • Spool Removal: To remove the spool, especially for models with double winding handles, the lock nuts and second handle are removed from the main shaft. The knurled centre screw (if applicable) and Star Nut are unscrewed. Holding the spool firmly, the axle is withdrawn, allowing the line to free itself. When replacing the axle, it must be turned until its slot engages the notches in the friction clutch's internal mechanism. This process is designed to be quick, taking only a few seconds with practice.
  • Adjustable Drag: The non-reversing friction clutch's tension is adjusted via the Star Adjusting Nut or handwheel. This allows for real-time adjustment during fishing, eliminating the need to set maximum tension for normal fishing.
  • Swivel Functionality: An optional swivel clamp enables the reel to follow the line's direction, which helps in laying the line evenly on the spool during retrieval. A crank screw can be used to lock the reel in a fixed position if desired.

Maintenance Features

Proper maintenance is crucial for the longevity and optimal performance of the Alvey Reel:

  • Routine Cleaning: After each use, the reel should be washed off with fresh water to remove salt and debris.
  • Lubrication: Handles and roller guides should be oiled with light oil regularly. The grease nipple should be lubricated with oil or light grease occasionally, depending on usage frequency.
  • Major Service: For a more comprehensive service, the clutch washers should be oiled. If applicable, clutch cover plates may need to be removed for this task.

Spare parts and service are readily available, ensuring that the reel can be maintained and repaired as needed. Additional maintenance tips and hints are available on the manufacturer's website.

Alvey REEF QUEEN Specifications

General IconGeneral
BrandAlvey
ModelREEF QUEEN
CategoryFishing Equipment
LanguageEnglish