Need help?Do you have a question about the ALZA TX-850 and is the answer not in the manual?
General| Sensitivity Adjustment | Yes |
|---|---|
| Power supply | Battery |
| Battery Type | 9V Battery |
| Battery Life | Approx. 20 hours |
| Discrimination | Yes |
Lists all components included in the detector's packaging for assembly.
Details expected battery duration for alkaline and rechargeable types.
Explains the 3-segment indicator stages and corresponding battery voltage.
Lists the items required for the initial demonstration of the metal detector.
Instructions on how to place the metal detector for the demonstration.
Explains how ground minerals interfere with detection and the need for calibration.
Discusses ignoring undesirable items like foil, nails, and pull-tabs during coin searches.
Details how different metals are classified on the display's 0-100 scale.
Explains how to estimate object size and depth using DISC and Pinpoint modes.
Describes sources and effects of EMI and initial mitigation strategies.
Instructions on how to turn the detector on and initial gain settings.
Visual overview of the detector's display, knobs, and buttons.
Explanation of mode selection and threshold control functions.
Details the functions of the GG/PINPOINT and +/- buttons.
Procedure for automatic ground balancing to cancel mineral signals.
Guidance on adjusting GAIN and THRESHOLD for optimal performance.
Discusses sources of noise and the detector's suitability for outdoor use.
Explains how to interpret the display for ground mineralization and phase.
Notes that GG feature is not available in Discrimination Mode.
Guidance on adjusting controls in Discrimination Mode, particularly Gain.
Explains Gain as detector sensitivity in Discrimination Mode.
Explains how to switch between DISC and ALL METAL modes using the right knob.
Details how to adjust the discrimination level using the +/- buttons.
Discusses managing noise in DISC Mode, especially when the coil is still.
Provides guidance on proper search coil movement in DISC Mode.
Explains how to interpret Target ID and Target scale displays.
Details the 3-digit value indicating target identification on the display.
Describes the arc display for classifying metal objects in ALL METAL Mode.
Explains how tone identification works based on discrimination settings.
Details how target elimination is managed through discrimination settings.
Explains effects of DISC values up to 40, 41-79, and at 80.
Details how target values relate to tone and detection in Discrimination Mode.
Step-by-step guide for performing automatic and manual ground balancing.
Instructions for fine-tuning ground balance using +/- buttons while pumping.
Explains positive response from minerals when GND BL setting is too high.
Explains negative response from minerals when GND BL setting is too low.
Explains the 7-segment bar graph indicating ground mineralization (Fe3O4).
Describes the Signal Indicator bar graph for target size and proximity.
Explains the V.C.O. and LOW tone beep responses to detected targets.
Details the 2-digit value for accurate target identification in DISC Mode.
Lists common approximate target values for various metal objects.
Guidance on where to find gold, common locations and prospecting tips.
Information on the prospecting community and clubs like GPAA.
Advice on recognizing posted claims and seeking permission.
Explains types of hot rocks, their characteristics, and discrimination tips.
Describes spontaneous chatter, loss of sensitivity, and wobbly audio as EMI symptoms.
Lists various sources of EMI, including power lines, cell phones, and motors.
Using Gain and Threshold to reduce sensitivity and eliminate interference.
Differentiating EMI from coil issues, loose connectors, or coil cover problems.
Steps to verify a target's identification by circling it with the search coil.
Guidance on maintaining proper search coil height and motion during sweeps.
Technique for locating a target precisely in DISC Mode.
Procedure to further refine the target location for easier extraction.
Explanation of search coil drift and how to retune the detector.
Details mechanical aspects like weight, coil size, rod construction, and armrest.
Covers operating frequency, overload ratings, ground balance range, and suppression.
Lists battery life, operating temperature, and humidity range.
Ten ethical guidelines for responsible treasure hunting and site respect.
Lists conditions that void the product's 2-year warranty.
Guidance on returning the product for recyclable waste disposal.
To Next Page
