6
• Ground balance
Ground Balancing is the ability of the detector to ignore, or “see through” the earth’s
naturally occurring minerals, and only sound a tone when a metal objects is detected.
The TX-850 incorporates proprietary circuitry and programming to eliminate false
signals from severe ground conditions.
Assembly
List of parts
No tools are required to assemble the TX-850. The box for your detector contains the
following parts:
1) One (1) control housing with
2) One (1) upper stem and one (1) lower stem connected
3) One (1) wing nut, two (2) mounting washers as one (threaded bolt)
4) One (1) 8.5”x11” DD-search coil S-shaped stem
5) Owner’s manual
If any part is missing, please contact your local dealer.
To Next Page
Loading...
