Need help?Do you have a question about the ALZA UGREEN and is the answer not in the manual?
Remove the rear panel of the enclosure as the first installation step.
Insert the M.2 SSD into the enclosure, aligning the notch.
Use the provided fastener to fix the SSD in place.
Reinstall the rear panel to complete the enclosure assembly.
Connect the SSD enclosure to your computer using the provided cable.
Detach the bottom cover of the unit as the first removal step.
Release and lift out the SSD from the enclosure after removing the cover.
Details on product identifiers, input, and output ports.
Information on USB standards and maximum data transfer rates.
Specifications for compatible M.2 SSDs and supported transfer protocols.
Supported operating systems and physical dimensions of the enclosure.
Notes on unsupported SSD types, such as NVME or PCIe.
Explanation of transfer rates influenced by SATA 3.0 limitations.
Advice on power supply, voltage, and handling to prevent damage.
Warnings about disconnecting during transfers and data backup recommendations.
List of items included in the product package.
Details on the 2-year warranty, claims, and proof of purchase.
Conditions that invalidate the warranty, including misuse or damage.
Instructions for the correct disposal of electronic waste according to WEEE.
To Next Page
General