IS-300CA INVERTER POWER SUPPLY
990-418 xiii
CAUTION
Apply the specified source voltage.
Applying the wrong voltage can cause fire and electrical shock.
Keep water and water containers away from the Power Supply.
Water spilled on the Power Supply can cause a short circuit, electrical shock, or fire.
Use proper tools (wire strippers, pressure wire connectors, etc.) for terminations of the
connecting cables.
Do not nick the wire conductor. Doing so can cause a short circuit, electric shock, or fire.
Install the Power Supply on a firm, level surface.
Injury may result if the Power Supply falls over or drops from an uneven surface.
Keep combustible matter away from the Power Supply.
Spatter can ignite combustible materials. If you cannot remove all combustible materials, cover
them with a non-combustible material.
Do NOT cover the Power Supply with a blanket, cloth, etc.
Heat generated by the operating Power Supply may ignite a blanket or cover.
Wear ear protectors.
Loud noises can damage hearing.
Keep a fire extinguisher nearby.
Make sure there is a fire extinguisher in or near the welding shop in case of fire.
Regularly inspect and maintain the Power Supply.
Regular inspection and maintenance is essential to safe ope
ration and long life of the equipment.
If you see any damage, make necessary repairs before operation.
To Next Page
Loading...