Amada IS-300CA - User Manual

Need help?

Do you have a question about the Amada IS-300CA and is the answer not in the manual?

Summary

Safety Precautions

Chapter 1: System Description

IS-300 CA Features Overview

Details the basic, advanced, and EtherNet/IPTM models and their key features.

Chapter 3: Using Programming Functions

IS-300 CA Programming Options

Explains menu screens, power supply state settings, and schedule screen options.

Advanced IS-300 CA EtherNet;IPTM Options

Chapter 4: Operating Instructions

IS-300 CA Operating Instructions Introduction

IS-300 CA Welding Operation Guide

Details the steps for starting welding operations and checking the valve sequence.

Chapter 5: Maintenance

IS-300 CA Troubleshooting Guide

Lists error codes, causes, and corrective measures for IS-300CA operational issues.

Appendix D: Communications

IS-300 CR Communications Description

IS-300 CR External Communication Setup

Covers data transmission parameters like mode, rate, format, and connectors.

IS-300 CR Communication Configuration

IS-300 CR Communication Protocol and Data Strings

Details single-directional communication mode data strings and parameter definitions.

Appendix E: EtherNet;IPTM Communications

IS-300 CR EtherNet;IPTM Introduction

Introduces EtherNet/IPTM connectivity setup with Allen Bradley PLCs and support files.

IS-300 CR Bus Controller IP Address Setup

Guides on setting the IP address for the EtherNet/IPTM bus controller via webserver.

IS-300 CR Allen Bradley PLC Configuration

Details options for adding Ethernet modules to Allen Bradley PLC ACD projects.

IS-300 CR System Communication Configurations

Explains communication settings for the MA-660 pendant and NG signal selection.

IS-300 CR I;O and Weld Data Controls

Defines controller tag definitions for digital/analog I/O and weld data.

IS-300 CR Weld Schedule Software Application

Guides on using the IS-300CR Weld Controller Software Application for control.

IS-300 CR Bus Controller Diagnostics and Wiring