APPENDIX E: EtherNet/IP
TM
COMMUNICATIONS
IS-300CR INVERTER POWER SUPPLY
E-6 990-418
Section III. Configuring the Bus Controller with an Allen
Bradley
®
PLC
There are two options on how to add a Bus Controller Ethernet communication module to an Allen
Bradley
®
PLC .ACD project.
• Option 1 - Add an Ethernet communication module to a new ACD project on an Allen Bradley
®
PLC (refer to page E-7).
• Option 2 - If the machine builder already has an existing functional Allen Bradley
®
PLC ACD
project, this option will show how to add the Ethernet module through the RSLogix5000
backplane and import the data types, tags and program routines (refer to page E-12).
Refer to the appropriate section below for details of each option.
To Next Page
Loading...