CHAPTER 3: USING PROGRAMMING FUNCTIONS
IS-300CA INVERTER POWER SUPPLY
3-16 990-418
l. TOTAL COUNTER
The display changes depending on the setting of WELD2 STOP/WELD COUNT and
COUNTER on the MODE SELECT screen.
1. When WELD2 STOP/WELD COUNT is WELD2 STOP and COUNTER is TOTAL
TOTAL COUNTER is displayed. The count value is incremented by one despite the result
of the upper/lower limit judgment in monitoring.
2. When WELD2 STOP/WELD COUNT is WELD2 STOP and COUNTER is GOOD.
GOOD COUNTER
is displayed. The count value is incremented by one when the monitored
value is within the range of the upper/lower limit.
To Next Page
Loading...