AMALGAMATED INSTRUMENT PM4-IV - Page 14

ACCS Access mode OFF, EASY,
NONE or ALL
OFF 5.40 / 33
SPAC Setpoint access mode
(
∗
Optional)
A1, A1-2 etc. A1 5.41 / 33
SQrt Square root mode on or OFF OFF 5.42 / 34
A1, A2
etc.
Alarm relay operation mode LiuE, tARE,
P.HLd,
d.HLd, Hi,
Lo or dISP
LiuE See
4.1
5.43 / 34
bAR Bargraph display operation
mode (
∗
Optional)
LiuE, tARE,
P.HLd,
d.HLd, Hi,
Lo or dISP
LiuE 5.44 / 35
rEC or
REC2
or
dG.OP
or
SERL
Analog /digital/serial operation
mode (
∗
Optional)
LiuE, tARE,
P.HLd,
d.HLd, Hi,
Lo or dISP
LiuE 5.45 / 36
Lo
dISP
Low overrange visual warning
limit value
Any display
value or OFF
OFF 5.46 / 37
HIGH
dISP
High overrange visual warning
limit value
Any display
value or OFF
OFF 5.47 / 37
dISP Display visual warning flashing
mode
FLSH or
-or-
FLSH 5.48 / 37
bAUd
RAtE
Baud rate for serial
communications (
∗
Optional)
300, 600,
1200, 2400,
4800, 9600,
19.2 or 38.4
9600 5.49 / 38
PrtY Parity for serial communications
(
∗
Optional)
NONE, EUEN
or odd
NONE 5.50 / 38
O.Put Output for serial
communications (
∗
Optional)
dISP, Cont,
POLL, A.buS
or M.buS
Cont 5.51 / 38
Addr Instrument address for serial
communications (
∗
Optional)
0 to 31 0 5.52 / 39
SERL Serial mode for serial
communications (
∗
Optional)
LiuE, tARE,
P.HLd,
d.HLd, Hi,
Lo, HiLo or
dISP
LiuE 5.53 / 39
(
∗
Optional)—this function will only be accessible if the relevant option is fitted
14 of 56 PM4IVMAN-2.4-0