To Next PageTo Next Page
Need help?Do you have a question about the Amana GMES960403ANAA and is the answer not in the manual?
Key safety and operational notes for service technicians and users.
Hazards and warnings related to carbon monoxide poisoning in enclosed spaces.
Warnings and cautions for safe installation, adjustment, and operation of the furnace.
Guidelines for selecting an appropriate and safe location for furnace installation.
Requirements for supplying adequate fresh air for proper combustion and ventilation.
Requirements and considerations for converting to propane gas or installing at high altitudes.
Critical instructions for installing vent/flue and combustion air pipes to prevent hazards.
Restrictions for locating vent/flue pipe and combustion air intake terminations.
Tables detailing allowable lengths, elbows, and diameters for vent/flue pipe systems.
Guidance on the function and maintenance of condensate drain lines and traps.
Specifications for gas supply types, pressure, and piping connections for safe operation.
How high altitude affects furnace performance and the need for conversion kits.
Instructions and kits required for converting the furnace to operate on propane gas.
Proper procedures for connecting the furnace to the building's gas supply piping.
Procedures for leak testing gas connections and supply systems.
Safety warnings and recommendations for propane gas detection and handling.
Safety warnings and guidelines for making electrical connections to the unit.
Guidelines for ductwork design and the necessity of return air filters.
Detailed steps for the furnace's normal heating operation sequence.
Common causes and fixes for abnormal heating operation, including LED codes.
Steps to conduct a heating performance test and calculate BTU input.
Procedures for checking electrical components, wiring, and motor performance.
Checking safety limit controls, rollout switches, ignitors, and gas valve operation.
Procedures for checking main burners, orifices, gas pressure, and flashback.
Checking pressure switches and addressing high altitude application requirements.
Diagnosing ignition control failures and checking flame sensor readings.
Guide to diagnosing furnace problems based on symptoms and LED error codes.
Detailed fault descriptions corresponding to LED error codes for diagnosis.
Identifying potential causes for furnace malfunctions based on symptoms.
Recommended actions to resolve furnace operational issues and errors.
General