Need help?Do you have a question about the Amana Menumaster HDC518 and is the answer not in the manual?
Guides users through manual cooking, preprogrammed sequences, and custom programming.
Detailed procedure for replacing interlock switches and adjusting the oven door for proper function.
Lists common error codes (F1-F6) and their corresponding corrective actions for the control board.
Outlines testing procedures and expected resistance values for thermal cutouts, diodes, triacs, and capacitors.
Describes a field test procedure to measure microwave oven power output using water temperature rise.
Provides methods to isolate and test individual magnetrons in dual-magnetron models for low heat issues.
Guides users through manual cooking, preprogrammed sequences, and custom programming.
Detailed procedure for replacing interlock switches and adjusting the oven door for proper function.
Lists common error codes (F1-F6) and their corresponding corrective actions for the control board.
Outlines testing procedures and expected resistance values for thermal cutouts, diodes, triacs, and capacitors.
Describes a field test procedure to measure microwave oven power output using water temperature rise.
Provides methods to isolate and test individual magnetrons in dual-magnetron models for low heat issues.
General| Power Output | 1800 Watts |
|---|---|
| Interior Material | Stainless Steel |
| Frequency | 2450 MHz |
| Defrost | Yes |
| Exterior Finish | Stainless Steel |
| Voltage | 120V |
| Color | Stainless Steel |
| Child Lock | No |
| Type | Commercial Microwave Oven |
| Cooking Modes | Microwave |
To Next Page