J1
J5
J6
J4
Pin 1
Pin 1
Pin 1
Pin 1
Side
Touch
Panel
Connector
H.V. board
Connector
Interlock
Connector
Top
Touch
Panel
Connector
A B
Test Points
Function Test Set-Up Meter
Setting
Probe Placement Results
Input to Display
Board
At Display
Board
Volts Test points A and B 3.0 VAC
If voltage is present and no display is
indicated, replace display board.
If no voltage is present, check wire
harness connections and H.V. board.
!
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to oven and discharge capacitor
before servicing, unless testing requires power.
C
Pink wire
Volts DC
Test points C and
J1 Pink wire
-25 to -30 VDC
To Next Page
Loading...
