Energy Options
Option Cycle selection procedure Description
Wash Temp Boost
Heats water to approximately
140°F (60°C). Can be used with
any cycle except
RINSE/HOLD
and
PLATE WARMER.
1. Select
WASH TEMP BOOST
button.
2. Select
ENERGY SAVER WASH
button to turn
WASH TEMP
BOOST
option off.
WASH TEMP
BOOST
is always on unless
ENERGY SAVER WASH
is
selected.
Delays timer advancement until
proper water temperature is
reached. Helps activate detergent
to clean food, grease and soil from
dishes.
Energy Saver Wash
Dishwasher goes through wash
cycle without a timer delay to
heat water.
1. Select
ENERGY SAVER WASH
button.
2. Select
WASH TEMP BOOST
option to turn option off.
Dishwasher goes through wash
cycle without a timer delay to heat
water.
Heated Dry
Provides faster drying since
heating element is on during
drying cycle.
3. Select
HEATED DRY
button.
4. To cancel option, select
AIR
DRY button.
Water vapor may be seen coming
from vent during any drying cycle.
Vent is closed during wash cycle to
hold in moisture and noise. Vent
opens during drying cycle. Drying
option may be changed at anytime
during wash cycle.
Air Dry
AIR DRY
option saves electricity
since the heating element is off
during drying cycle.
1. Select
AIR DRY
button.
2. To cancel option, select
HEATED DRY
option.
Air-dries dishes without using
heating element. To speed drying
process open door slightly after
cycle is complete.
Part No. 12422802
Printed in U.S.A.
©
1998 Amana Appliances
Amana, Iowa 52204 P/N 124344701
To Next Page
Loading...
Need help?
General
