Need help?Do you have a question about the Amann Girrbach af350 and is the answer not in the manual?
General| Spindle Speed | 60, 000 rpm |
|---|---|
| Axis | 5-axis |
| Material Compatibility | composite, glass ceramics |
| Milling Strategy | Dry and wet milling |
| Milling Time | Varies based on material and complexity |
| Power Supply | 230 V / 50-60 Hz |
Details the AF350 as a universal milling device, highlighting its ease of use and ergonomic design.
Instructions for inspecting the appliance for any transport damage immediately after unpacking.
Outlines the AF350's suitability for milling and drilling technical dental works, listing examples.
Guides the user on connecting the power cable and plugging the device into the mains socket.
Procedure for switching the appliance's voltage between 230V and 100V using the fuse holder.
Description of the actuators and switches located on the base for controlling the milling device.
Step-by-step guide for assembling the jointed arm onto the vertical adjuster and motor unit.
Details methods for adjusting the height at the spindle column, vertical adjuster, and with micrometer screw.
Explains how to fix and move the patented MT3 modelling table, including locking mechanisms.
Instructions on using the marking stick and connecting the adjustable adapter cable.
Information about the blockout set, its heating element, inserts, and connecting cable.
Crucial safety warnings and precautions for operating and maintaining the AF350 appliance.
Provides key technical specifications including dimensions, weight, electrical connection, and motor details.
Lists the components included with the AF350 order number 177605.
Lists available accessories and individual parts for the AF350 by their order numbers.
To Next Page
