Amantii SYMMETRY Series User Manual (English)

Questions and Answers:

J
Julie GrimesJul 28, 2025
What to do if Amantii SYMMETRY turns off and won't turn on?
- W
  william90Jul 28, 2025
  If your Amantii Indoor Fireplace turns off and won't turn back on, it could be due to several reasons. First, the appliance may have overheated, causing the thermal switch to disconnect. To resolve this, turn off the main switch and allow the appliance to cool down for 10 minutes before turning it back on. Second, the house circuit breaker might have tripped; in this case, reset the house circuit breaker. Finally, the appliance's fuse may have blown, requiring you to replace the fuse.
T
Travis BowmanAug 1, 2025
Why Amantii SYMMETRY will not come on?
- M
  Megan HughesAug 1, 2025
  If your Amantii Indoor Fireplace does not turn on when you flip the switch to the ON position, there are a few potential causes. First, ensure that the appliance is properly plugged into an electrical outlet. If it is, the appliance may have overheated, causing the safety device to disconnect the thermal switch. To fix this, turn off the main switch, let the appliance cool down for 10 minutes, and then turn it back on. Alternatively, the circuit board might be burnt out, requiring inspection and replacement if necessary.
E
Elizabeth AdamsAug 5, 2025
How to fix Amantii Indoor Fireplace remote control?
- C
  Charles ButlerAug 5, 2025
  If the remote control for your Amantii Indoor Fireplace isn't working, the batteries might be low. Try replacing the AAA batteries in the remote control. Also, ensure that the unit switch is in the “I” position.
S
Sara CarrAug 10, 2025
Why Amantii Indoor Fireplace has dim flame?
- K
  Kayla SloanAug 10, 2025
  If your Amantii Indoor Fireplace has a dim or no flame, it could be because the flame LEDs are burnt out. Inspect the LEDs and replace them if needed. Another possible cause is that the back black cloth is falling off and rolling the flicker. In this case, change to a new flicker and back black cloth.
J
jonathan92Aug 13, 2025
Why Amantii Indoor Fireplace has no warm air?
- P
  plyonsAug 13, 2025
  If no warm air is coming out of your Amantii Indoor Fireplace, the heater might be burnt out. Inspect the burner and heater assembly, and replace it if necessary.
T
Thomas MckinneyAug 18, 2025
What to do if Amantii SYMMETRY Indoor Fireplace ember bed is not glowing?
- F
  Faith RiosAug 18, 2025
  If the ember bed in your Amantii Indoor Fireplace is not glowing or is dimming, the ember LEDs might be burnt out. Inspect the ember bed LEDs and replace them if necessary.