HOVER STAR™ DIAGRAM
Landing Gear
Safety Guard
Motion Sensor
Motion Sensor
Motion Sensor
Motion Sensor
Rotor Blade
Power Button
Charging Socket
LETS GET STARTED!
Follow these simple steps in the order below and you will be successfully flying your HOVER STAR
in no time!
3 4
3. Make sure your HOVER STAR is fully charged.
5. Hold the HOVER STAR in the mid-air and then quickly
release it as if you were dropping it from your hand, The
HOVER STAR will automatically turn on and begin
hovering.
7. When done playing make sure to turn the power off
by depressing the power button for 3 seconds (see
power button diagram on pg. 3 ) All the lights will turn
off.
1. When using the HOVER STAR, first find a room in
your house with high ceilings and a large open space
where you have room to walk around. You may need
to move some furniture.
2. Make sure all external sources of wind like ceiling
fans, floor fans or opened windows are turned off and
closed. Central Air conditioning should be okay but it is
a good idea to stay away from strong drafty areas.
4. Short press the Power Button until the LED lights on
the HOVER STAR turn on and become solid green
(see diagram D)
6. To stop the HOVER STAR quickly capture the HOVER
STAR with your hand and turn it upside down (see
diagram E) the blades will stop spinning.
• Verify that HOVER STAR has been fully charged.
• Make sure the empty space has no obstacles that would obstruct flight
DO NOT ATTEMPT TO FLY YOUR HOVER STAR OUTDOORS. IT COULD DAMAGE YOUR PRODUCT.
PREPARING FOR FLIGHT
D
E
To Next Page
Loading...