Amazfit Pace - Page 31

2) Charging contacts
 Use a toothpick, cotton swab, or a toothbrush with rubbing alcohol and lightly
clean the charging contacts on the back of the tracker unit.
 Wipe with a dry cloth or tissue before charging.
 Make sure not to scrape the contacts with a wire brush or anything metal, since
this can damage the plating and cause corrosion.
3) Charging pins
 Soak a toothbrush with rubbing alcohol and press against the pins carefully.
 Make sure that no debris from the swab is left behind.
 Carefully wipe with a dry cloth or tissue before connecting to tracker for charging.