4) Band and tracker unit
With a wet/dampened cloth or cotton swab with rubbing alcohol, gentle rub the
outside of the band and tracker unit with the cloth.
Dry the band with a clean cloth, tissue or towel.
Do not submerge the band in liquid or use abrasive cleaners.
32. Where is the QR Code?
The QR code is shown once during the initial setup of your Pace when you first turn it on.
If you need to retrieve the QR again, you will need to reset your watch to factory settings
by:
Going to the home screen
Swipe up and you will reach More Settings
To Next Page
Loading...
