Amazfit GTR3 pro User Manual

Amazfit GTR 3 Pro User Manual
(English Edition)
Connection and pairing
Use your phone to scan the following QR code, and download and install the Zepp app. For a
better user experience, update the app to the latest version as prompted.
Note: Your mobile phone must run Android 7.0 or iOS 12.0 or later.
Initial pairing:
When the watch is started for the first time, the QR code used for pairing displays on the screen.
Open the Zepp app on your phone, log in to the app, and scan the QR code on the watch to pair
your phone with the watch.
Pairing with a new phone:
1. Open the app on your old phone and synchronize data with the watch.
2. On your old phone, go to the information page of the watch, tap Unpair at the bottom of the
page, and unpair the old phone from the watch.
3. Restore the factory settings of the watch, and then pair the watch with your new phone as
described in the initial pairing procedure.

Amazfit GTR3 pro Specifications

General

Display Type	AMOLED
Display Size	1.45 inches
Resolution	480 x 480 pixels
Battery Life	Up to 12 days
Battery Capacity	450 mAh
Water Resistance	5 ATM
Connectivity	Bluetooth 5.0
Operating System	Zepp OS
Weight	32 g (without strap)
Dimensions	46 x 46 x 10.7 mm
Compatibility	Android 7.0 and above, iOS 12.0 and above
Charging Time	Approx. 2 hours
Sensors	Accelerometer, Gyroscope, Barometric, Ambient Light
Voice Assistant	Amazon Alexa
Sports Modes	Over 150
Strap Material	Silicone