Tap on More Settings and swipe up, you will see "Device". Tap on Device, you will access
"factory reset".
Tap Factory Reset and select option with the check mark in the green circle
The Amazfit Pace will restart and the QR code will reappear on the watch screen.
33. How to change wear habit?
1) From the home screen of the Watch, Swipe DOWN to access System Settings
2) Tap Common
3) Swipe UP till Find the wear Habit
4) Tap Wear Habit
5) Select left Hand or right hand
34. My Pace is having Bluetooth and/or Wi-Fi connectivity issues. What should I
do?
If you find that your Pace device is having trouble staying connected to your Bluetooth
and/or Wi-Fi, please run the following diagnostic test.
Go to "More Settings" in the smartwatch.
Under Settings, scroll down list and tap "About."
Under "About," scroll down to "Legal Statement."
Continuously tap on "Legal Statement" until "Lab" appears below it.
Tap on "Lab" and select "Signal Strength."
Tap "Start."
A Pass or Fail message will appear once the test is complete. Note: Be sure your device is
connected to your Wi-Fi and is right next to the router when you run the test.
To Previous Page
Loading...
