AMAZON COMMERCIAL 6000 - AC;DC Current Measurement

26
EN
Frequency mode (mV~) (electrical)
• In AC voltage measurement mode, press the
Hz/% button (I). Hz (Hertz) lights up.
• Connect in parallel the test probes (Q) to the
circuit or component being measured.
• The stabilized value on the display (A) is read as
the actual reading.
Duty cycle mode (mV~) (electrical)
• In AC voltage measurement mode, press the
Hz/% button (I) twice. % (percent) lights up.
• Connect in parallel the test probes (Q) to the
circuit or component being measured.
• The stabilized value on the display (A) is read as
the actual reading.
AC/DC current measurement
NOTICE
Do not make 10A current
measurements for longer than 30seconds.
Exceeding 30seconds may cause damage to the
product and/or the connector leads (Q).