14
2. Fully open the propane tank valve.
3. Push the control knob in and rotate it half way between HI and LO.
4. While pushing in the control knob, press the red IGNITOR button repeatedly until the main
burner lights. Continue to hold the control knob in for 30 more seconds, then release the it.
5. Turn the control knob to adjust the flame.
6. When you are finished, turn the control knob and propane tank OFF. Wait at least five
minutes before re-lighting the heater.
If you experience any ignition problems, please see “Troubleshooting” on page 17.
Caution: Avoid inhaling the fumes emitted from the heater's first use. Smoke and odor from
the burning of oils used in the manufacturing may be present. The smoke and odor dissipates
after approximately 30 minutes. The heater should NOT produce thick black smoke.
When the heater is ON
The emitter screen becomes bright red due to intense heat. The color is more visible at night.
The burner displays tongues of blue and yellow flame. These flames should not be yellow or
produce thick black smoke, indicating an obstruction of airflow through the burners. The flame
should be blue with straight yellow tops. If excessive yellow flame is detected, turn off the
heater and refer to “Troubleshooting“on page 17.
Re-lighting your heater
1. Push in the control knob and turn it OFF.
Patio Heater_15-0285_V6_ENG.book Page 14 Friday, March 6, 2015 7:55 AM
To Next Page
Loading...
Need help?
General
