8
Setup Instructions
Charging the Headphones
1. Slide the OFF/ON switch on the charging dock to ON.
2. Place the headphone earpieces in the contoured areas of the charging dock.
The headphone’s charging port on the left earpiece and the dock’s charging
pins must make contact with each other to charge correctly.
3. The Charging indicator turns red when the headphones are charging.
4. When fully charged, the Charging indicator turns green.
Note: When the headphone (internal non-replaceable) battery charge is low, the
Power/Pairing indicator on the headphone earpiece blinks red approximately 30
minutes prior to the battery being depleted.
Charging port
on earpiece
Charging pins on
Charging Dock
To Next Page
Loading...
Need help?
General
