Amazon B07XMRCXJ7 - Switching On;Off and Tank Drainage

11
EN
Operation (Functions)
NOTICE
The product does not operate, when the water tank (O)
is full or is not placed properly into the housing. In that case the
full
indicator(B) lights up, and the display (D) shows an error code.
Switching on/off
• Connect the product to the a suitable socket outlet. The display (D)
and the
full indicator(B) shortly light up.
• Press the
on/off button (L) to switch the product on/off.
• Refer to the “Operation (Control Panel)” chapter to make the settings.
Emptying the water tank
• When the water tank (O) is full the product stops its operation.
The
full indicator (B) lights up, and the display (D) shows an
errorcode.
• Hold the water tank (O) on its sides and carefully pull it out.
• Drain the water into a sink.
• Place the water tank (O) properly into the housing.
• The product restarts automatically.