15
EN
Maintenance
• Any person who is involved with working on or breaking into a
refrigerant circuit should hold a current valid certificate from an
industry-accredited assessment authority, which authorizes their
competence to handle refrigerants safely in accordance with an
industry recognized assessment specification.
• Servicing shall only be performed as recommended by the equipment
manufacturer. Maintenance and repair requiring the assistance of
other skilled personnel shall be carried out under the supervision of
the person competent in the use of flammable refrigerants.
Troubleshooting
Problem Cause / Solution
The product does
not switch on.
• Check if the power plug is connected to the
socket outlet. Check if the socket outlet works.
• Check the water level in the water tank (O).
• Check that the water tank’s (O) is properly
fitted into the housing.
The product does
not dry the air as it
should.
• Wait to get enough time to remove the humidity.
• Make sure there are no curtains, blinds or
furniture blocking the front or back of the
product.
• The desired humidity level may not be set low
enough.
• Check that all doors, windows and other
openings are securely closed.
• The room temperature is too low, below
41°F (+5 °C).
• A kerosene heater or another equipment is
giving off water vapor in the room.
The product makes
a loud noise during
operation.
• The air filter is clogged.
• The product is tilted instead of staying upright
as it should be.
• The floor surface is not leveled.
Water on floor • The drain hose connection may be loose.
• The drain hose outlet (S) might be opened.
• The drain hose pump is activated, but no
drain hose is connected.
To Next Page
Loading...