Amazon BLINK CAMERA User Manual

INSTALLING YOUR
BLINK CAMERA
DOC020523
PRO TIP: Using your Blink app, test the
camera alignment before installing in your
backyard. The “welcome mat” should be
nicely centered.
1. Launch your Blink app.
2. On the main screen, select the
“controls” symbol adjacent to
your camera’s name. It looks like
this:
3. You will now be on the
Device Settings screen. From
here, select General Settings.
4. From the General Settings
screen, look for Status LED
about 2/3 down the screen.
5. Slide to the Off position. The
Status LED is now disabled.
Need technical support?
For help setting up your Blink camera, Wifi connection issues or questions
on using the Blink app, please contact Blink support directly at:
1-833-392-5465
Or Blink online support and chat at:
support.blinkforhome.com
p
?
DISABLING THE CAMERA’S BLUE RECORDING STATUS LIGHT
Your Blink camera has a blue LED status light on the front of the
camera which turns on anytime recording is in progress. This
will disturb nesting birds and must be disabled.
Although The Peep Show
®
loves and recommends the Blink camera, we have no association
with Blink and are not equipped to handle technical support. We always refer our bird lovers
directly to the Blink support center for the latest expertise on the Blink cameras and Blink app.
BLINK CAMERA INSTALLATION

Amazon BLINK CAMERA Specifications

General

Type	Wireless security camera
Field of View	110 degrees
Night Vision	Yes
Motion Detection	Yes
Power Source	2 AA Lithium Batteries
Connectivity	Wi-Fi
Operating Temperature	-4°F to 113°F (-20°C to 45°C)
Weather Resistance	IP65
Battery Life	Up to 2 years
Storage	Cloud Storage (Subscription Required)

Summary

Installing Your Blink Camera

Technical Support Information

Contact details for Blink camera setup, Wi-Fi connection issues, and app usage.

Step 01: Remove Front Panel

Instructions for detaching the front panel of the Blink camera.

Step 02: Remove Camera Mount

Guidance on detaching the camera mount from the device.

Step 03: Insert Batteries

Instructions for inserting fresh lithium batteries into the camera.

Step 04: Mount Camera into Housing

Gently lift the silicon band and slide the camera into its mount.

Step 05: Orient Camera Correctly

Ensure the Blink logo is adjacent to the thumb grab for proper orientation.

Step 06: Reinsert Camera Mount

Replace the camera mount back into The Peep Show with the thumb grab facing front.

Step 07: Test Camera Alignment

Using the Blink app, test camera alignment before final installation.

Step 08: Disable Blue Status Light

Instructions to disable the camera's blue LED recording status light via the Blink app.