User Guide 
 
Quick Start Guide 
WHAT’S IN THE BOX 
 
•  Wireless Remote Model L5B83H 
•  2xAAA Batteries 
 
Buttons: 
Power, Voice Search, Navigation, Select, Menu, Back, Home, Rewind, Play/Pause, Fast Forward 
 
Power On Device 
-  Insert batteries and install compartment cover 
-  Pair Device to host:  Choose the applicable pairing instructions from the options below: 
 
A.   This is a replacement remote: 
1.  Restart your Fire TV/TV Stick by unplugging the power cable from your power outlet than 
plugins it back in.  After the TV home screen displays, your remote is ready for pairing. 
2.  Press and hold the Home button on the new remote for at least 10 seconds.  Your new 
remote should automatically pair with our fire TV/TV stick.  You will see an on-screen 
message when it has successfully paired. 
B.  This is an additional  remote: 
1.  On your new remote, press and hold the Home button for 120 seconds to enter 
discoverable mode. 
2.  You must use your existing remote for the following steps.  Press the Home button. 
3.  Navigate to the Settings location at the top of the screen.  Select Controllers and Bluetooth 
Devices > Amazon Fire TV Remotes > Add New Remote.  Your Amazon Fire TV will search for 
discoverable remotes, and display them in a list. 
4.  Select the new remote, named Amazon fire TV remote.  You will see and on-screen message 
when it has been successfully paired. 
 
Use your Voice Search 
-  Hold down voice search button and speak 
 
 
 
 
 IMPORTANT PRODUCT INFORMATION  
 
For safety, compliance, recycling, and other important information regarding your Device, please refer 
to the Legal & Compliance section in the User Manual.