6
Setting the master code
Use the master code to enter your safe if you forget your User Code.
1. With the door open, press 0, 0, then press the Reset button.
2. Input the new code (3-8 digits), then press # to con rm. The
(con rm) light turns on and your
new master code is set.
NOTE: If the (con rm) light doesn’t turn on, your new code isn’t set. Repeat these steps.
Opening your safe – after the first time
1. Input your user code (3 to 8 digits) on the keypad. Press # to con rm.
2. The con rm light turns on.
3. Rotate the knob clockwise, then open the door.
NOTE: The preset user code is “159”.
Locking the safe
Close the door, then turn the knob counterclockwise to lock it.
Aut
If an
entr
Sec
Bolt
•
•
•
1.
2.
3.
4.
B00UG9HB1Q Security Safe Black_15-0299_MAN_V1_Full.indd 6 4/6/2015 12:13:26 PM
To Next Page
Loading...
Need help?
General
