9
EN
When the total sum of all items on scale > 4% of scale’s
maximum weight capacity, the Tare function is used.
(4%=80 g when capacity is 2000 g; 200 g when capacity is
5000 g) The Tare function is active once the T icon appears
on the upper left corner of the LCD screen.
Under this condition:
By pressing , you can see the total weight of all loads
on the scale. If you want to weigh more loads,just press
to reset LCD reading to ‘0’ again.
Auto shut off
2mins 15sec
Auto shut-off occurs if display shows
‘0’ or shows the same weight reading for
2 minutes and 15 seconds.
Manual shut off
To maximize battery life, press and
hold for 3 seconds to turn off the scale
when you’re done using it.
Warning indicators
1.
2.
1. Low batteries. Replace with
new batteries.
2. Maximum weight capacity (11 lb, 5000g)
has been exceeded. Remove items to
prevent damage to scale.
Cleaning and Maintenance
• Clean the scale with a slightly damp cloth. DO NOT
immerse the scale in water or use chemical / abrasive
cleaning agents.
To Next Page
Loading...
Need help?
General
