10
Note:
1
Exhaust valve: Pull out the exhaust valve from the lid. Clean the internal side of the exhaust
valve and the exhaust valve and float valve of the lid with a brush and cloth at least once a
month.
2
Sealing gate: Please remove oil and dirt from the sealing gate with detergent and a brush. With
residual oil and dirt in it, it may appear in yellowish. After washing, it may recover its original
color as stainless steel. It is recommended to clean the sealing gate once every 2 months.
3
Water box: After cooking, the steam may stay in the water box of the external pot as water.
Water in the box should be removed to avoid unpleasant odors, please clean it with a clean
cloth.
Structural diagram of float valve
Tips:
Confirm that the float valve, block proof cover and seal ring are correctly installed before use each
time;
Before putting the inner pot into the cooker each time, please remove the dirt and water from the
external side of the inner pot and internal side of the external pot;
Please move the product by the handle of the cooker body; please remove the water from the
housing cover with a cloth.
To Next Page
Loading...
Need help?
General