15
Prepare for cooking
Step 5: Safely close the lid
• Before closing the lid, check if the sealing ring is well installed.
• Hold the handle of the upper cover, align the “ ” on the edge of the upper cover with the “ ”
mark on the edge of the housing cover, put the top cover horizontally on the cooker body, turn
the upper cover about 30° clockwise to the lock position, and align the “ ” mark on the edge
of the housing cover with the “ ” mark on the lid.
Step 6: Position the exhaust valve well
Sealing schematic diagram Exhaust schematic diagram
• When working, please turn the exhaust valve to the sealing position, which means the electric
pressure cooker remains at a sealing state;
• For manual exhaust, please turn the exhaust valve handle to the exhaust position, the electric
pressure cooker remains at an exhaust state; when exhausting, do not hold your hands or face
above the exhaust opening;
• Check if the float valve drops down before working (before heating, the float valve is down).
To Next Page
Loading...